HP LJ 1100 |
|
Light status |
Description "light off" "light on" “light blinking" |
 |
PowerSave mode (or the printer is off)
The printer uses PowerSave mode to conserve
energy. |
 |
Ready
The printer is ready to print. |
 |
Processing Self test page Form Feed
The printer is receiving or processing data. |
 |
Buffered data
The printer memory is retaining unprinted
data. A file has been sent to the printer
that does not contain a from feed at the
end. |
 |
Manual feed
The printer is in manual feed mode. The printer
is waiting for a different size sheet of
paper to be placed in the Single Sheet Input
Slot or Paper Input Bin. |
 |
Door open, no Toner Cartridge, or paper jam
The printer is in an error state. |
 |
Paper out
The printer is out of paper. |
 |
Memory out
The printer ran out of memory in the middle
of a print job. |
 |
Reset/Printer initialization
The printer memory is being reset and all
previously sent print jobs are being purged.
Or, a printer initialization is taking place.
All lights blink for 1/2 of a second or longer
if initializing. |
 |
Fatal error
All lights are on.
Press the Go key to see the secondary light
pattern. |
Fatal error |
 |
ROM/RAM Error. An error was found with the
ROM or RAM. The printer believes that the
ROM is corrupted or an error has been found
in the RAM. |
 |
Fuser Error. This indicates a fusing assembly
malfunction.
NOTE: Chronic fuser failures, fuser overheating,
or both are indicators of an uninterruptible
power supply or battery backup being used
with the printer. Uninterruptible power supplies
(UPSs) should not be used with the printer. |
 |
Beam Error. There are a number of causes
for this error, and some of the causes may
disappear. |
 |
Print Engine Error. The formatter and engine
are not communicating. |
 |
Printer Laser/Scanner Error. Caused by a
laser scanner malfunction. |
 |
Firmware Error.
Note the LED patterns on the BiTronics error
code. Contact HP technical support with this
information as well as a description of what
data was sent, the errors encountered prior
to the firmware error, the condition of the
printer prior to the error, and any other
information that may help isolate the error. |
 |
Incompatible DIMM Error (Accessory Error). |
 |
Document Scan Engine Error. |
 |
Document Scan Engine NVRAM Error. |